Selection of the installation site of the rapid temperature change test chambe

Selection of the installation site of the rapid temperature change test chamber:

1. The distance from the adjacent wall can smoothly give full play to the role and characteristics of the environmental test chamber. The long-term temperature of 15 ~ 45 °C and the relative environmental humidity exceeding 86% should be selected. site.
2. The working temperature of the installation site must not change significantly.
3.  It should be installed on a leveling surface (use a level to determine the level on the road during installation).
4. It should be installed in a site without sun exposure.
5.  It should be installed in a site with excellent natural ventilation.
6. It should be installed in areas where flammable materials, explosive products and high-temperature heat sources are eliminated.
7. It should be installed in a site with less dust.
8. Install it as close as possible to the switching power supply of the power supply system.